scmManager

The following plugin provides functionality available through Pipeline-compatible steps. Read more about how to integrate steps into your Pipeline in the Steps section of the Pipeline Syntax page.

For a list of other such plugins, see the Pipeline Steps Reference page.

scmManager

scmManager

serverUrl : String
Specify the root URL of the SCM-Manager instance including the context path (such as https://scm-manager.org/scm/) or an ssh URL (such as ssh://scm-manager.com:2222/; this requires the SSH plugin in SCM-Manager).
repository : String
Select an existing repository from the SCM-Manager instance.
credentialsId : String
Select valid credentials for the specified SCM-Manager instance.
id : String (optional)
traits (optional)
- $class: 'ApprovedPullRequestTrait'
  Sets if approvals are required before building pull requests.
  - strategyId : int
    Sets if approvals are required before building pull requests.
    
    No approval necessary.
    
    No check of approvals will be performed before building.
    
    Any approval required
    
    Before building the pull request must be approved. This may be performed by the author or someone else.
    
    Non-author approval required
    
    Before building the pull request must be approved and that approval cannot be performed by the author of the pull request.
    
    Author and Non-author approval required
    
    Before building the pull request must be approved by the author and a non-author.
- $class: 'AuthorInChangelogTrait'
- $class: 'BitbucketAgedRefsTrait'
  Defines the number of days to accept an unmodified git ref as candidate for being built (supposing it contains a Jenkinsfile). In a practical effect it is a ripoff from the Orphaned Item Strategy but on indexing time.
  - retentionDays : String
- bitbucketBranchCommitSkipTrait
  Branches whose last commit's message contains (case insensitive) the pattern "[ci skip]" or "[skip ci]" will be ignored.
- bitbucketBuildStatusNotifications
  Configure the Bitbucket notifications.
  - disableNotificationForNotBuildJobs : boolean (optional)
  - sendSuccessNotificationForUnstableBuild : boolean (optional)
- bitbucketCommitSkipTrait
  Pull requests whose last commit's message contains (case insensitive) the pattern "[ci skip]" or "[skip ci]" will be ignored.
- $class: 'BitbucketJiraValidatorTrait'
  Enforces a pull request to be filled with a title containing a single and unresolved Jira ticket, formatted as defined at the global config (defaulting matching as JENKINS-1234).
  - jiraServerIdx : int
- buildStatusNameCustomPart
  - buildStatusNameCustomPart : String (optional)
- $class: 'ChangeDiscoveryTrait'
  - queryString : String
    Provide an additional query string to search for open changes. The status:open is implicitly added and does not need to be specified. See Gerrit search operators documentation for a detailed list of the supported search operators.
    
    Examples:
    
    -is:wip
    does not include work-in-progress changes
    
    is:private
    includes private changes
- $class: 'CheckoutOptionTrait'
  - extension
    - timeout : int
      Specify a timeout (in minutes) for checkout.
      This option overrides the default timeout of 10 minutes.
      You can change the global git timeout via the property org.jenkinsci.plugins.gitclient.Git.timeOut (see JENKINS-11286). Note that property should be set on both controller and agent to have effect (see JENKINS-22547).
- $class: 'CleanAfterCheckoutTrait'
  - extension
    - deleteUntrackedNestedRepositories : boolean (optional)
      Deletes untracked submodules and any other subdirectories which contain .git directories.
- $class: 'CleanBeforeCheckoutTrait'
  - extension
    - deleteUntrackedNestedRepositories : boolean (optional)
      Deletes untracked submodules and any other subdirectories which contain .git directories.
- $class: 'CleanMercurialSCMSourceTrait'
  When this behaviour is present, each build will wipe any local modifications or untracked files in the repository checkout. This is often a convenient way to ensure that a build is not using any artifacts from earlier builds.
- $class: 'CloneOptionTrait'
  - extension
    - shallow : boolean
      Perform shallow clone, so that git will not download the history of the project, saving time and disk space when you just want to access the latest version of a repository.
    - noTags : boolean
      Deselect this to perform a clone without tags, saving time and disk space when you just want to access what is specified by the refspec.
    - reference : String
      Specify a folder containing a repository that will be used by Git as a reference during clone operations.
      This option will be ignored if the folder is not available on the controller or agent where the clone is being executed.
    - timeout : int
      Specify a timeout (in minutes) for clone and fetch operations.
      This option overrides the default timeout of 10 minutes.
      You can change the global git timeout via the property org.jenkinsci.plugins.gitclient.Git.timeOut (see JENKINS-11286). Note that property should be set on both controller and agent to have effect (see JENKINS-22547).
    - depth : int (optional)
      Set shallow clone depth, so that git will only download recent history of the project, saving time and disk space when you just want to access the latest commits of a repository.
    - honorRefspec : boolean (optional)
      Perform initial clone using the refspec defined for the repository. This can save time, data transfer and disk space when you only need to access the references specified by the refspec.
- $class: 'DisableStatusUpdateTrait'
  Disables notifications (commit status updates) to GitHub for builds.
- $class: 'DiscoverOtherRefsTrait'
  Discovers other specified refs on the repository.
  - ref : String
    The pattern under /refs on the remote repository to discover, can contain a wildcard.
    Example: test/*/merged
  - nameMapping : String (optional)
    Mapping for how the ref can be named in for example the @Library.
    Example: test-@{1}
    Where @{1} replaces the first wildcard in the ref when discovered.
    
    By default it will be "namespace_before_wildcard-@{1}". E.g. if ref is "test/*/merged" the default mapping would be "test-@{1}".
- $class: 'FilterChecksTrait'
  - queryOperator
    - Values: ID, SCHEME
  - queryString : String
    Provide a query string to search for pending checks. Depending on which mode was chosen, this either should be a checker-scheme or the UUID of a specific checker.
- gitLabForkDiscovery
  Discovers merge requests where the origin project is a fork of the target project.
  - strategyId : int
    Determines how merge requests are discovered:
    
    Merging the merge request with the current target branch revision
    
    Discover each merge request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current merge request revision
    
    Discover each merge request once with the discovered revision corresponding to the merge request head revision without merging
    
    Both the current merge request revision and the merge request merged with the current target branch revision
    
    Discover each merge request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the merge request head revision without merging
  - trust
    
    One of the great powers of merge requests is that anyone with read access to a project can fork it, commit some changes to their fork and then create a merge request against the original project with their changes. There are some files stored in source control that are important. For example, a Jenkinsfile may contain configuration details to sandbox merge requests in order to mitigate against malicious merge requests. In order to protect against a malicious merge request itself modifying the Jenkinsfile to remove the protections, you can define the trust policy for merge requests from forks.
    
    Other plugins can extend the available trust policies. The default policies are:
    
    Nobody
    
    Merge requests from forks will all be treated as untrusted. This means that where Jenkins requires a trusted file (e.g. Jenkinsfile) the contents of that file will be retrieved from the target branch on the origin project and not from the merge request branch on the fork project.
    
    Members
    
    Merge requests from collaborators to the origin project will be treated as trusted, all other merge requests from fork repositories will be treated as untrusted. Note that if credentials used by Jenkins for scanning the project does not have permission to query the list of contributors to the origin project then only the origin account will be treated as trusted - i.e. this will fall back to Nobody.
    
    Trusted Members
    
    Merge requests forks will be treated as trusted if and only if the fork owner has either Developer or Maintainer or Owner Access Level in the origin project. This is the recommended policy.
    
    Everyone
    
    All merge requests from forks will be treated as trusted. NOTE: this option can be dangerous if used on a public project hosted on a GitLab instance.
    - Type: jenkins.scm.api.trait.SCMHeadAuthority<? super io.jenkins.plugins.gitlabbranchsource.GitLabSCMSourceRequest, ? extends jenkins.scm.api.mixin.ChangeRequestSCMHead2, ? extends jenkins.scm.api.SCMRevision>
- $class: 'GitBrowserSCMSourceTrait'
  - browser
    - $class: 'AssemblaWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://www.assembla.com/code/PROJECT/git/).
    - $class: 'BacklogGitRepositoryBrowser'
      
      repoName : String
      
      repoUrl : String
    - bitbucketServer
      
      repoUrl : String
      Specify the Bitbucket Server root URL for this repository (such as https://bitbucket:7990/OWNER/REPO/).
    - $class: 'BitbucketWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://bitbucket.org/OWNER/REPO/).
    - $class: 'CGit'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://cgit.example.com:port/group/REPO/).
    - $class: 'FisheyeGitRepositoryBrowser'
      
      repoUrl : String
      Specify the URL of this repository in FishEye (such as http://fisheye6.cenqua.com/browse/ant/).
    - $class: 'GitBlitRepositoryBrowser'
      
      repoUrl : String
      Specify the root URL serving this repository.
      
      projectName : String
      Specify the name of the project in GitBlit.
    - $class: 'GitBucketBrowser'
      
      url : String
    - $class: 'GitLab'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://gitlabserver:port/group/REPO/).
      
      version : String (optional)
      Specify the major and minor version of GitLab you use (such as 9.1). If you don't specify a version, a modern version of GitLab (>= 8.0) is assumed.
    - $class: 'GitLabBrowser'
      
      Specify the HTTP URL for this project's GitLab page so that links to changes can be automatically generated by Jenkins. The URL needs to include the owner and project. If the GitLab server is https://gitLab.example.com then the URL for bob's skunkworks project might be https://gitLab.example.com/bob/skunkworks.
      
      projectUrl : String
      Specify the HTTP URL for this project's GitLab page. The URL needs to include the owner and project so, for example, if the GitLab server is https://gitLab.example.com then the URL for bob's skunkworks project might be https://gitLab.example.com/bob/skunkworks
    - $class: 'GitList'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://gitlistserver:port/REPO/).
    - $class: 'GitWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://github.com/jenkinsci/jenkins.git).
    - $class: 'GiteaBrowser'
      
      repoUrl : String
      Specify the HTTP URL for this repository's Gitea page. The URL needs to include the owner and repository so, for example, if the Gitea server is https://gitea.example.com then the URL for bob's skunkworks project repository might be https://gitea.example.com/bob/skunkworks
    - $class: 'GithubWeb'
      
      repoUrl : String
      Specify the HTTP URL for this repository's GitHub page (such as https://github.com/jquery/jquery).
    - $class: 'Gitiles'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://gwt.googlesource.com/gwt/).
    - $class: 'GitoriousWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://gitorious.org/gitorious/mainline).
    - $class: 'GogsGit'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://gogs.example.com:port/username/some-repo-url.git).
    - $class: 'KilnGit'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://khanacademy.kilnhg.com/Code/Website/Group/webapp).
    - $class: 'Phabricator'
      
      repoUrl : String
      Specify the phabricator instance root URL (such as http://phabricator.example.com).
      
      repo : String
      Specify the repository name in phabricator (such as the foo part of phabricator.example.com/diffusion/foo/browse).
    - $class: 'RedmineWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://SERVER/PATH/projects/PROJECT/repository).
    - $class: 'RhodeCode'
      
      repoUrl : String
      Specify the HTTP URL for this repository's RhodeCode page (such as http://rhodecode.mydomain.com:5000/projects/PROJECT/repos/REPO/).
    - $class: 'ScmManagerGitRepositoryBrowser'
      
      repoUrl : String
      Specify the root URL serving this repository (such as https://scm-manager.org/scm/repo/namespace/name).
    - $class: 'Stash'
      
      repoUrl : String
      Specify the HTTP URL for this repository's Stash page (such as http://stash.mydomain.com:7990/projects/PROJECT/repos/REPO/).
    - $class: 'TFS2013GitRepositoryBrowser'
      
      repoUrl : String
      Either the name of the remote whose URL should be used, or the URL of this module in TFS (such as http://fisheye6.cenqua.com/tfs/PROJECT/_git/REPO/). If empty (default), the URL of the "origin" repository is used.
      If TFS is also used as the repository server, this can usually be left blank.
    - $class: 'TracGitRepositoryBrowser'
    - $class: 'TuleapBrowser'
      
      Specify the HTTPS URL for the Tuleap Git repository so that links to changes can be automatically generated by Jenkins.
      
      repositoryUrl : String
      The URL is the web URL of the Tuleap Git repository.
    - $class: 'ViewGitWeb'
      
      repoUrl : String
      Specify the root URL serving this repository (such as http://code.fealdia.org/viewgit/).
      
      projectName : String
      Specify the name of the project in ViewGit (e.g. scripts, scuttle etc. from http://code.fealdia.org/viewgit/).
- $class: 'GitHubAgedRefsTrait'
  Defines the number of days to accept an unmodified git ref as candidate for being built (supposing it contains a Jenkinsfile). In a practical effect it is a ripoff from the Orphaned Item Strategy but on indexing time.
  - retentionDays : String
- gitHubBranchCommitSkipTrait
  Branches whose last commit's message contains (case insensitive) the pattern "[ci skip]" or "[skip ci]" will be ignored.
- gitHubCommitSkipTrait
  Pull requests whose last commit's message contains (case insensitive) the pattern "[ci skip]" or "[skip ci]" will be ignored.
- $class: 'GitHubJiraValidatorTrait'
  Enforces a pull request to be filled with a title containing a single and unresolved Jira ticket, formatted as defined at the global config (defaulting matching as JENKINS-1234).
  - jiraServerIdx : int
- gitHubSourceChecks
  - verboseConsoleLog : boolean (optional)
    If this option is checked, verbose log will be output to build console; the verbose log is useful for debugging the publisher creation.
- gitHubStatusChecks
  - name : String (optional)
  - skip : boolean (optional)
  - skipNotifications : boolean (optional)
    If this option is checked, the notifications sent by the GitHub Branch Source Plugin will be disabled.
  - skipProgressUpdates : boolean (optional)
  - suppressLogs : boolean (optional)
  - unstableBuildNeutral : boolean (optional)
- $class: 'GitLFSPullTrait'
- gitlabAvatar
  - disableProjectAvatar : boolean (optional)
    Due to a GitLab bug, sometimes it is not possible to GitLab API to fetch GitLab Avatar for private projects or when the api doesn't have token access. You may choose to skip avatar for projects if you want to avoid broken or self generated avatars.
- gitlabSkipNotifications
- $class: 'GitToolSCMSourceTrait'
  - gitTool : String
- $class: 'HookRegistrationTrait'
  - webHookMode : String
  - systemHookMode : String
- gitHubIgnoreDraftPullRequestFilter
- $class: 'IgnoreOnPushNotificationTrait'
- jervisFilter
  This will look at the root of a GitHub reference for .jervis.yml for the branches and tags filtering. You can customize the name of the YAML file searched for if you like.
  
  For Tags:
  
  It will filter for the tag name.
  
  For Branches:
  
  It will filter for the branch name.
  
  It will filter for pull requests destined for the branch name.
  
  Example YAML
  branches: only: - master
  More on specify branches and tags to build
  
  By default Jervis will generate Jenkins jobs for all branches that have a .jervis.yml file. You can control and limit this behavior by specifying the branches or tags key in your .jervis.yml.
  
  Whitelist or blacklist branches and tags
  
  You can either whitelist or blacklist branches that you want to be built:
  # blacklist branches: except: - legacy - experimental # whitelist branches: only: - master - stable
  The same YAML can be applied to tags.
  # blacklist tags: except: - .*-rc - .*-beta # whitelist tags: only: - v[.0-9]+
  If you specify both only and except, then except will be ignored. .jervis.yml needs to be present on all branches you want to be built. .jervis.yml will be interpreted in the context of that branch so if you specify a whitelist in your master branch it will not propagate to other branches.
  
  Using regular expressions
  
  You can use regular expressions to whitelist or blacklist branches:
  branches: only: - master - /^[.0-9]+-hotfix$/
  Any name surrounded with / in the list of branches is treated as a regular expression. The expression will use Pattern.compile to compile the regex string into a Groovy regular expression.
  - yamlFileName : String
    
    The filename which will be read from GitHub to determine if a Jenkins branch, tag, or pull request should be built. Provide a comma separated list of paths to YAML files in a repository and it will check each path as a fallback.
    
    For example, set the value to: .jervis.yml, .ci/jervis.yml and this plugin will first check for valid YAML in .jervis.yml. If no YAML exists, then it will fall back to checking .ci/jervis.yml.
- $class: 'LocalBranchTrait'
- logComment
  - logSuccess : boolean (optional)
    Sometimes the user doesn't want to log the builds that succeeded. The trait only enable logging of failed/aborted builds by default. Select this option to include logging of successful builds as well.
  - sudoUser : String (optional)
    Enter a sudo username of the user you want to comment as on GitLab Server. Remember the token specified should have api and sudo access both (which can only be created by your GitLab Server Admin). It is recommended to create a dummy user in your GitLab Server with an appropriate username like `jenkinsadmin` etc. Leave empty if you want use the owner of the project as the commenter.
- $class: 'MercurialBrowserSCMSourceTrait'
  - browser
    - $class: 'FishEye'
      
      url : String
      Specify the root URL serving this repository, such as: http://www.example.org/browse/hg/
    - $class: 'GoogleCode'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'HgWeb'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'Kallithea'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'KilnHG'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'RhodeCode'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'RhodeCodeLegacy'
      
      url : String
      Specify the root URL serving this repository (such as this).
    - $class: 'ScmManager'
      
      url : String
      Specify the root URL serving this repository (such as http://YOURSCMMANAGER/scm/repo/NAMESPACE/NAME/).
- $class: 'MercurialInstallationSCMSourceTrait'
  - installation : String
- $class: 'NotificationContextTrait'
  Defines a custom context label to be sent as part of Github Status notifications for this project.
  - contextLabel : String
    The text of the context label for Github status notifications.
  - typeSuffix : boolean
    
    Appends the relevant suffix to the context label based on the build type. '/pr-merge', '/pr-head' or '/branch'
- gitLabOriginDiscovery
  Discovers merge requests where the origin project is the same as the target project.
  - strategyId : int
    Determines how merge requests are discovered:
    
    Merging the merge request with the current target branch revision
    
    Discover each merge request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current merge request revision
    
    Discover each merge request once with the discovered revision corresponding to the merge request head revision without merging
    
    Both the current merge request revision and the merge request merged with the current target branch revision
    
    Discover each merge request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the merge request head revision without merging
- $class: 'PathBasedPullRequestFilterTrait'
  - inclusionField : String
    If any of the changed files in a discovered PR match this regex then it will generate a build (unless excluded by the exclusion regex).
  - exclusionField : String
    Any changed files in a discovered pull request that matches this regex will not be considered for the inclusion regex.
- $class: 'PreBuildMergeTrait'
  - extension
    - options
      Nested Object
      mergeTarget : String
      The name of the branch within the named repository to merge to, such as master.
      
      fastForwardMode (optional)
      Merge fast-forward mode selection.
      The default, --ff, gracefully falls back to a merge commit when required.
      For more information, see the Git Merge Documentation
      
      Values: FF, FF_ONLY, NO_FF
      
      mergeRemote : String (optional)
      Name of the repository, such as origin, that contains the branch you specify below. If left blank, it'll default to the name of the first repository configured above.
      
      mergeStrategy (optional)
      Merge strategy selection. This feature is not fully implemented in JGIT.
      
      Values: DEFAULT, RESOLVE, RECURSIVE, OCTOPUS, OURS, SUBTREE, RECURSIVE_THEIRS
- $class: 'PretestedIntegrationSCMTrait'
  - extension
    - gitIntegrationStrategy
      Nested Choice of Objects
      accumulated
      
      Accumulated Commit Strategy
      
      This strategy merges your commits with the --no-ff switch
      
      shortCommitMessage : boolean (optional)
      
      ffonly
      
      Fast Forward only (--ff-only) Strategy
      
      This strategy fast-forward only using the --ff-only switch - or fails
      
      shortCommitMessage : boolean (optional)
      
      squash
      
      Squashed Commit Strategy
      
      This strategy squashes all your commit on a given branch with the --squash option
    - integrationBranch : String
      What to specify
      
      The branch name must match your integration branch name. No trailing slash.
      
      Merge is performed the following way
      
      Squash commit
      
      git checkout -B <Branch name> <Repository name>/<Branch name> git merge --squash <Branch matched by git> git commit -C <Branch matched by git>
      
      Accumulated commit
      
      git checkout -B <Branch name> <Repository name>/<Branch name> git merge -m <commitMsg> <Branch matched by git> --no-ff
      
      When changes are pushed to the integration branch?
      
      Changes are only ever pushed when the build results is SUCCESS
      
      git push <Repository name> <Branch name>
    - repoName : String
      
      What to specify
      
      The repository name. In git the repository is always the name of the remote. So if you have specified a repository name in your Git configuration. You need to specify the exact same name here, otherwise no integration will be performed. We do the merge based on this.
      
      No trailing slash on repository name.
      
      Remember to specify this when working with NAMED repositories in Git
- $class: 'PruneStaleBranchTrait'
- $class: 'PruneStaleTagTrait'
- bitbucketPublicRepoPullRequestFilter
  If the repository being scanned is a public repository, this behaviour will exclude all pull requests. (Note: This behaviour is not especially useful if scanning a single repository as you could just not include the pull request discovery behaviours in the first place)
- $class: 'PullRequestDiscoveryTrait'
  - excludeBranchesWithPRs : boolean
    Exclude branches for which there is an open pull request
- $class: 'PullRequestLabelsBlackListFilterTrait'
  Filter github pull requests out by labels matching any labels specified.
  - labels : String
    Labels to match a pull request. Use ',' to split multiple labels.
- $class: 'PullRequestLabelsMatchAllFilterTrait'
  Filter github pull requests by labels matching all labels specified.
  - labels : String
    Labels to match a pull request. Use ',' to split multiple labels.
- $class: 'PullRequestLabelsMatchAnyFilterTrait'
  Filter github pull requests by labels matching any labels specified.
  - labels : String
    Labels to match a pull request. Use ',' to split multiple labels.
- $class: 'PullRequestNameFilterTrait'
  Filter Bitbucket Pull Requests by matching in title any phrase specified.
  - strategyId : int
  - phrase : String
    Phrases to match a title of the pull request. Use ',' to split multiple phrases - only for no regular expression.
  - ignoreCase : boolean
    Case sensitivity defines whether uppercase and lowercase letters are treated as distinct (unchecked) or equivalent (checked).
  - regex : boolean
    Treat a phrase as a regular expression. Note, the comma character is part of the expression!
- $class: 'RefSpecsSCMSourceTrait'
  - templates
    - value : String
      A ref spec to fetch. Any occurrences of @{remote} will be replaced by the remote name (which defaults to origin) before use.
- headRegexFilterWithPRFromOrigin
  - regex : String
    A Java regular expression to restrict the names. Names that do not match the supplied regular expression will be ignored.
  - tagRegex : String
    A Java regular expression to restrict the names. Names for tags that do not match the supplied regular expression will be ignored.
- $class: 'RemoteNameSCMSourceTrait'
  - remoteName : String
- $class: 'SparseCheckoutPathsTrait'
  - extension
    - sparseCheckoutPaths
      Array / List of Nested Object
      path : String
- $class: 'SubmoduleOptionTrait'
  - extension
    - disableSubmodules : boolean
      By disabling support for submodules you can still keep using basic git plugin functionality and just have Jenkins to ignore submodules completely as if they didn't exist.
    - recursiveSubmodules : boolean
      Retrieve all submodules recursively (uses '--recursive' option which requires git>=1.6.5)
    - trackingSubmodules : boolean
      Retrieve the tip of the configured branch in .gitmodules (Uses '--remote' option which requires git>=1.8.2)
    - reference : String
      Specify a folder containing a repository that will be used by Git as a reference during clone operations.
      This option will be ignored if the folder is not available on the controller or agent where the clone is being executed.
      To prepare a reference folder with multiple subprojects, create a bare git repository and add all the remote urls then perform a fetch:
      
      git init --bare git remote add SubProject1 https://gitrepo.com/subproject1 git remote add SubProject2 https://gitrepo.com/subproject2 git fetch --all
    - timeout : int
      Specify a timeout (in minutes) for submodules operations.
      This option overrides the default timeout of 10 minutes.
      You can change the global git timeout via the property org.jenkinsci.plugins.gitclient.Git.timeOut (see JENKINS-11286). Note that property should be set on both controller and agent to have effect (see JENKINS-22547).
    - parentCredentials : boolean
      Use credentials from the default remote of the parent project.
    - depth : int (optional)
      Set shallow clone depth, so that git will only download recent history of the project, saving time and disk space when you just want to access the latest commits of a repository.
    - shallow : boolean (optional)
      Perform shallow clone, so that git will not download the history of the project, saving time and disk space when you just want to access the latest version of a repository.
    - threads : int (optional)
      Specify the number of threads that will be used to update submodules.
      If unspecified, the command line git default thread count is used.
- mrTriggerComment
  - commentBody : String
    Add comment body you want to use to instruct Jenkins CI to rebuild the MR
  - onlyTrustedMembersCanTrigger : boolean
- tuleapBranchDiscovery
- tuleapNotifyPullRequest
- tuleapForkPullRequestDiscovery
- tuleapPullRequestDiscovery
- $class: 'UserIdentityTrait'
  - extension
    - name : String
      
      If given, "GIT_COMMITTER_NAME=[this]" and "GIT_AUTHOR_NAME=[this]" are set for builds. This overrides whatever is in the global settings.
    - email : String
      
      If given, "GIT_COMMITTER_EMAIL=[this]" and "GIT_AUTHOR_EMAIL=[this]" are set for builds. This overrides whatever is in the global settings.
- bitbucketWebhookConfiguration
  Sets the value for committersToIgnore in the Bitbucket Webhook. Value should be a comma separated string.
  
  committerToIgnore is used to prevent triggering Jenkins builds when commits by certain users are made.
  - committersToIgnore : String
- WebhookListenerBuildConditionsTrait
  - alwaysBuildMROpen : boolean (optional)
  - alwaysBuildMRReOpen : boolean (optional)
  - alwaysIgnoreMRApprove : boolean (optional)
  - alwaysIgnoreMRUnApprove : boolean (optional)
  - alwaysIgnoreNonCodeRelatedUpdates : boolean (optional)
    GitLab will send a webhook to Jenkins when there are updates to the MR including title changes, labels removed/added, etc. Enabling this option will prevent a build running if the cause was one of these updates. Note: these settings do not have any impact on build from comment settings.
- headWildcardFilterWithPRFromOrigin
  - includes : String
    Space-separated list of branch name patterns to consider. You may use * as a wildcard; for example: master release*
  - excludes : String
    Branch name patterns to ignore even if matched by the includes list. For example: release
  - tagIncludes : String
    Space-separated list of tag name patterns to consider. You may use * as a wildcard; for example: *-1.* to build only 1.0 tags from the maven release plugin.
  - tagExcludes : String
    Tag name patterns to ignore even if matched by the tag includes list. For example: *-0.*
- $class: 'WipeWorkspaceTrait'
- bitbucketBranchDiscovery
  Discovers branches on the repository.
  - strategyId : int
    Determines which branches are discovered.
    
    Exclude branches that are also filed as PRs
    
    If you are discovering origin pull requests, it may not make sense to discover the same changes both as a pull request and as a branch.
    
    Only branches that are also filed as PRs
    
    Discovers branches that have PR's associated with them. This may make sense if you have a notification sent to the team at the end of a triggered build or limited Jenkins resources.
    
    All branches
    
    Ignores whether the branch is also filed as a pull request and instead discovers all branches on the origin repository.
- bitbucketForkDiscovery
  Discovers pull requests where the origin repository is a fork of the target repository.
  - strategyId : int
    Determines how pull requests are discovered.
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging
  - trust
    
    One of the great powers of pull requests is that anyone with read access to a repository can fork it, commit some changes to their fork and then create a pull request against the original repository with their changes. There are some files stored in source control that are important. For example, a Jenkinsfile may contain configuration details to sandbox pull requests in order to mitigate against malicious pull requests. In order to protect against a malicious pull request itself modifying the Jenkinsfile to remove the protections, you can define the trust policy for pull requests from forks.
    
    Other plugins can extend the available trust policies. The default policies are:
    
    Nobody
    
    Pull requests from forks will all be treated as untrusted. This means that where Jenkins requires a trusted file (e.g. Jenkinsfile) the contents of that file will be retrieved from the target branch on the origin repository and not from the pull request branch on the fork repository.
    
    Forks in the same account
    
    Bitbucket allows for a repository to be forked into a "sibling" repository in the same account but using a different name. This strategy will trust any pull requests from forks that are in the same account as the target repository on the basis that users have to have been granted write permission to account in order create such a fork.
    
    Everyone
    
    All pull requests from forks will be treated as trusted. NOTE: this option can be dangerous if used on a public repository hosted on Bitbucket Cloud.
    - Type: jenkins.scm.api.trait.SCMHeadAuthority<? super com.cloudbees.jenkins.plugins.bitbucket.BitbucketSCMSourceRequest, ? extends jenkins.scm.api.mixin.ChangeRequestSCMHead2, ? extends jenkins.scm.api.SCMRevision>
- bitbucketPullRequestDiscovery
  Discovers pull requests where the origin repository is the same as the target repository.
  - strategyId : int
    Determines how pull requests are discovered.
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging
- bitbucketSshCheckout
  By default the discovered branches / pull requests will all use the same credentials that were used for discovery when checking out sources. This means that the checkout will be using the https:// protocol for the Git repository.
  This behaviour allows you to select the SSH private key to be used for checking out sources, which will consequently force the checkout to use the ssh:// protocol.
  - credentialsId : String
    Credentials used to check out sources.
    It must be a SSH key based credential.
- bitbucketTagDiscovery
  Discovers tags on the repository.
- bitbucketWebhookRegistration
  Overrides the defaults for webhook management.
  
  Webhooks are used to inform Jenkins about changes to repositories. There are two ways webhooks can be configured:
  
  Manual webhook configuration requires the user to configure Bitbucket with the Jenkins URL in order to ensure that Bitbucket will send the events to Jenkins after every change.
  
  Automatic webhook configuration requires that Jenkins has credentials with sufficient permission to configure webhooks and also that Jenkins knows the URL that Bitbucket can connect to.
  
  The Manage Jenkins » Configure Jenkins › Bitbucket Endpoints allows defining the list of servers. Each server can be associated with credentials. If credentials are defined then the default behaviour is to use those credentials to automatically manage the webhooks of all repositories that Jenkins is interested in. If no credentials are defined then the default behaviour is to require the user to manually configure webhooks.
  - mode : String
    There are two available modes:
    
    Disable hook management
    
    Disables hook management irrespective of the global defaults.
    
    Use item credentials for hook management
    
    Enabled hook management but uses the selected credentials to manage the hooks rather than those defined in Manage Jenkins » Configure Jenkins › Bitbucket Endpoints
- $class: 'com.cloudogu.scmmanager.scm.BranchDiscoveryTrait'
- $class: 'com.cloudogu.scmmanager.scm.TagDiscoveryTrait'
- dagshubBranchDiscovery
- $class: 'io.jenkins.plugins.dagshubbranchsource.traits.ForkPullRequestDiscoveryTrait'
  - buildOnPullHead : boolean (optional)
    If checked, then the build will run on the commit at the tip of the pull request head, instead of first trying to merge it into the target branch and then running the build on the merged commit.
- $class: 'io.jenkins.plugins.dagshubbranchsource.traits.OriginPullRequestDiscoveryTrait'
  - buildOnPullHead : boolean (optional)
    If checked, then the build will run on the commit at the tip of the pull request head, instead of first trying to merge it into the target branch and then running the build on the merged commit.
- dagshubTagDiscovery
- gitLabBranchDiscovery
  Discovers branches on the repository.
  - strategyId : int
    Determines which branches are discovered.
    
    Only branches that are not also filed as MRs
    
    If you are discovering origin merge requests, it may not make sense to discover the same changes both as a merge request and as a branch.
    
    Only branches that are also filed as MRs
    
    This option exists to preserve legacy behaviour when upgrading from older versions of the plugin. NOTE: If you have an actual use case for this option please file a merge request against this text.
    
    All branches
    
    Ignores whether the branch is also filed as a merge request and instead discovers all branches on the origin project.
- $class: 'io.jenkins.plugins.gitlabbranchsource.SSHCheckoutTrait'
  By default the discovered branches / merge requests will all use the same username / password credentials that were used for discovery when checking out sources. This means that the checkout will be using the https:// protocol for the Git repository.
  This behaviour allows you to select the SSH private key to be used for checking out sources, which will consequently force the checkout to use the ssh:// protocol.
  - credentialsId : String
    Credentials used to check out sources. Must be a SSH key based credential.
- gitLabTagDiscovery
- gitBranchDiscovery
  Discovers branches on the repository.
- gitTagDiscovery
  Discovers tags on the repository.
- headRegexFilter
  - regex : String
    A Java regular expression to restrict the names. Names that do not match the supplied regular expression will be ignored.
    NOTE: this filter will be applied to all branch like things, including change requests
- headWildcardFilter
  - includes : String
    Space-separated list of name patterns to consider. You may use * as a wildcard; for example: master release*
    NOTE: this filter will be applied to all branch like things, including change requests
  - excludes : String
    Space-separated list of name patterns to ignore even if matched by the includes list. For example: release alpha-* beta-*
    NOTE: this filter will be applied to all branch like things, including change requests
- headRegexFilterWithPR
  - regex : String
    A Java regular expression to restrict the names. Names that do not match the supplied regular expression will be ignored.
  - tagRegex : String
    A Java regular expression to restrict the names. Names for tags that do not match the supplied regular expression will be ignored.
- headWildcardFilterWithPR
  - includes : String
    Space-separated list of branch name patterns to consider. You may use * as a wildcard; for example: master release*
  - excludes : String
    Branch name patterns to ignore even if matched by the includes list. For example: release
  - tagIncludes : String
    Space-separated list of tag name patterns to consider. You may use * as a wildcard; for example: *-1.* to build only 1.0 tags from the maven release plugin.
  - tagExcludes : String
    Tag name patterns to ignore even if matched by the tag includes list. For example: *-0.*
- giteaBranchDiscovery
  Discovers branches on the repository.
  - strategyId : int
    Determines which branches are discovered.
    
    Exclude branches that are also filed as PRs
    
    If you are discovering origin pull requests, it may not make sense to discover the same changes both as a pull request and as a branch.
    
    Only branches that are also filed as PRs
    
    This option exists to preserve legacy behaviour when upgrading from older versions of the plugin. NOTE: If you have an actual use case for this option please file a pull request against this text.
    
    Only branches that are also filed as PRs or main
    
    Discover branches that are also files as PRs (have open PRs) or that are the master / main branch.
    
    All branches
    
    Ignores whether the branch is also filed as a pull request and instead discovers all branches on the origin repository.
- giteaForkDiscovery
  Discovers pull requests where the origin repository is a fork of the target repository.
  - strategyId : int
    Determines how pull requests are discovered:
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging
  - trust
    
    One of the great powers of pull requests is that anyone with read access to a repository can fork it, commit some changes to their fork and then create a pull request against the original repository with their changes. There are some files stored in source control that are important. For example, a Jenkinsfile may contain configuration details to sandbox pull requests in order to mitigate against malicious pull requests. In order to protect against a malicious pull request itself modifying the Jenkinsfile to remove the protections, you can define the trust policy for pull requests from forks.
    
    Other plugins can extend the available trust policies. The default policies are:
    
    Nobody
    
    Pull requests from forks will all be treated as untrusted. This means that where Jenkins requires a trusted file (e.g. Jenkinsfile) the contents of that file will be retrieved from the target branch on the origin repository and not from the pull request branch on the fork repository.
    
    Contributors
    
    Pull requests from collaborators to the origin repository will be treated as trusted, all other pull requests from fork repositories will be treated as untrusted. Note that if credentials used by Jenkins for scanning the repository does not have permission to query the list of contributors to the origin repository then only the origin account will be treated as trusted - i.e. this will fall back to Nobody.
    
    Everyone
    
    All pull requests from forks will be treated as trusted. NOTE: this option can be dangerous if used on a public repository hosted on a Gitea instance that allows signup.
    - gitLabTrustMembers
    - bitbucketTrustTeam
    - bitbucketTrustEveryone
    - bitbucketTrustNobody
    - gitLabTrustEveryone
    - gitLabTrustNobody
    - gitLabTrustPermissions
    - giteaTrustContributors
    - giteaTrustEveryone
    - giteaTrustNobody
    - gitHubTrustContributors
    - gitHubTrustEveryone
    - gitHubTrustNobody
    - gitHubTrustPermissions
- giteaPullRequestDiscovery
  Discovers pull requests where the origin repository is the same as the target repository.
  - strategyId : int
    Determines how pull requests are discovered:
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging
- giteaSSHCheckout
  By default the discovered branches / pull requests will all use the same username / password credentials that were used for discovery when checking out sources. This means that the checkout will be using the https:// protocol for the Git repository.
  This behaviour allows you to select the SSH private key to be used for checking out sources, which will consequently force the checkout to use the ssh:// protocol.
  - credentialsId : String
    Credentials used to check out sources. Must be a SSH key based credential.
- giteaTagDiscovery
- giteaWebhookRegistration
  Overrides the defaults for webhook management.
  
  Webhooks are used to inform Jenkins about changes to repositories. There are two ways webhooks can be configured:
  
  Manual webhook configuration requires the user to configure Gitea with the Jenkins URL in order to ensure that Gitea will send the events to Jenkins after every change.
  
  Automatic webhook configuration requires that Jenkins has credentials with sufficient permission to configure webhooks and also that Jenkins knows the URL that Gitea can connect to.
  
  The Manage Jenkins » Configure System › Gitea Server allows defining the list of servers. Each server can be associated with credentials. If credentials are defined then the default behaviour is to use those credentials to automatically manage the webhooks of all repositories that Jenkins is interested in. If no credentials are defined then the default behaviour is to require the user to manually configure webhooks.
  - mode : String
    There are two available modes:
    
    Disable hook management
    
    Disables hook management irrespective of the global defaults.
    
    Use item credentials for hook management
    
    Enabled hook management but uses the selected credentials to manage the hooks rather than those defined in Manage Jenkins » Configure System › Gitea Server
- gitHubBranchDiscovery
  Discovers branches on the repository.
  - strategyId : int
    Determines which branches are discovered.
    
    Exclude branches that are also filed as PRs
    
    If you are discovering origin pull requests, you may not want to also build the source branches for those pull requests.
    
    Only branches that are also filed as PRs
    
    Similar to discovering origin pull requests, but discovers the branch rather than the pull request. This means env.GIT_BRANCH will be set to the branch name rather than PR-#. Also, status notifications for these builds will only be applied to the commit and not to the pull request.
    
    All branches
    
    Ignores whether the branch is also filed as a pull request and instead discovers all branches on the origin repository.
- gitHubForkDiscovery
  Discovers pull requests where the origin repository is a fork of the target repository.
  - strategyId : int
    Determines how pull requests are discovered:
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch.
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging.
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging.
  - trust
    
    One of the great powers of pull requests is that anyone with read access to a repository can fork it, commit some changes to their fork and then create a pull request against the original repository with their changes. There are some files stored in source control that are important. For example, a Jenkinsfile may contain configuration details to sandbox pull requests in order to mitigate against malicious pull requests. In order to protect against a malicious pull request itself modifying the Jenkinsfile to remove the protections, you can define the trust policy for pull requests from forks.
    
    Other plugins can extend the available trust policies. The default policies are:
    
    Nobody
    
    Pull requests from forks will all be treated as untrusted. This means that where Jenkins requires a trusted file (e.g. Jenkinsfile) the contents of that file will be retrieved from the target branch on the origin repository and not from the pull request branch on the fork repository.
    
    Collaborators
    
    Pull requests from collaborators to the origin repository will be treated as trusted, all other pull requests from fork repositories will be treated as untrusted. Note that if credentials used by Jenkins for scanning the repository does not have permission to query the list of collaborators to the origin repository then only the origin account will be treated as trusted - i.e. this will fall back to Nobody. NOTE: all collaborators are trusted, even if they are only members of a team with read permission.
    
    Everyone
    
    All pull requests from forks will be treated as trusted. NOTE: this option can be dangerous if used on a public repository hosted on GitHub.
    
    From users with Admin or Write permission
    
    Pull requests forks will be treated as trusted if and only if the fork owner has either Admin or Write permissions on the origin repository. This is the recommended policy. Note that this strategy requires the Review a user's permission level API, as a result on GitHub Enterprise Server versions before 2.12 this is the same as trusting Nobody.
    - Type: jenkins.scm.api.trait.SCMHeadAuthority<? super org.jenkinsci.plugins.github_branch_source.GitHubSCMSourceRequest, ? extends jenkins.scm.api.mixin.ChangeRequestSCMHead2, ? extends jenkins.scm.api.SCMRevision>
- gitHubPullRequestDiscovery
  Discovers pull requests where the origin repository is the same as the target repository.
  - strategyId : int
    Determines how pull requests are discovered:
    
    Merging the pull request with the current target branch revision
    
    Discover each pull request once with the discovered revision corresponding to the result of merging with the current revision of the target branch.
    
    The current pull request revision
    
    Discover each pull request once with the discovered revision corresponding to the pull request head revision without merging.
    
    Both the current pull request revision and the pull request merged with the current target branch revision
    
    Discover each pull request twice. The first discovered revision corresponds to the result of merging with the current revision of the target branch in each scan. The second parallel discovered revision corresponds to the pull request head revision without merging.
- gitHubSshCheckout
  By default the discovered branches / pull requests will all use the same username / password credentials that were used for discovery when checking out sources. This means that the checkout will be using the https:// protocol for the Git repository.
  This behaviour allows you to select the SSH private key to be used for checking out sources, which will consequently force the checkout to use the ssh:// protocol.
  - credentialsId : String
    Credentials used to check out sources. Must be a SSH key based credential.
- gitHubTagDiscovery
  Discovers tags on the repository.

Was this page helpful?

Please submit your feedback about this page through this quick form.

Alternatively, if you don't wish to complete the quick form, you can simply indicate if you found this page helpful?

See existing feedback here.

User Handbook

Tutorials

Resources

scmManager

Examples:

Example YAML

More on specify branches and tags to build

Whitelist or blacklist branches and tags

Using regular expressions

Accumulated Commit Strategy

Fast Forward only (--ff-only) Strategy

Squashed Commit Strategy

What to specify

Merge is performed the following way

Squash commit

Accumulated commit

When changes are pushed to the integration branch?

What to specify

Resources

Project

Community

Other